Specification

DSW-120M

DSW-75M

DSW-20M

Measuring range  N?m
(at the time of Track)

3.0 - 120 N?m

0.30 - 75 N?m

0.30 - 20 N?m

301～1200 kgf?cm

3.0～750 kgf?cm

3.0～200 kgf?cm

30～1080 lbf?in

3.0～650 lbf?in

3.0～180 lbf?in

*A measurement unit is fixed to one unit. Specify when ordering

Accuracy

±0.5% (F/S)
(199 or less digit±1digit) 

±0.5% (F/S)
(499 or less digit±3digit)

±0.5% (F/S)
 (199 or less digit±1digit）

Display

The 4 figures digital display of LCD

The measurement direction

CW-CCW (right and left)

Measuring
mode

P-P  Peak

Holding Peak Load Value

T-R  Track

Showing Real time torque value ( Used for Zero-Adjustment )

P-D  Peak down

Holding Load Value at the moment to change from upward to downword

C Real-time output

Load torque value is outputted every about1/ 70 second by RS232C

Decision
function

Setting of torque value

Programmable High and Low setpoints with both audible beep and Green/ Red LED indicator for uniform torque tightening or GO/NO GO testing

The Maximum, the minimum, and the average value

Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.

Data spec.

Data transfer

Serial interface RS232C (Baud rate : 9600)

Data memory

300 data / ten channels data

A setup of the number of counts

One to 99 count   (count in a direction with a bundle)

Power supply

6 VDC (Ni-Cd chargeable battery 1.2V×4cells 600mAh)

Auto power save

10 minutes no use, automatically switch off.

Charging time

From empty - less than 5hours

Continues working time

12 hours

Outside size

φ34(grip)×440(L)

φ34(grip)×305(L)

φ28(grip)×231(L)

Socket engagement

12.7 square, including steel ball

9.5 square, including steel ball

Weight

 830g

 570g

 370g

Attachment

-

One-way socket

Accessories
 (one piece each)

AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)

An inspection report, a proofreading certificate, a traceability system figure