灌注系統概述
HSE—HA生理學系統是一系列應用廣泛的完備產品，可用于整體動物生理學、立體或在體器官和組織灌注及組織浴槽研究。這些系統具有廣泛的應用，包括傳統的**藥理學、DMPK、毒理學、呼吸系統、心臟病學、分子生物學和生理學。每個系統都設計了標準的組件，再加一些其他配置以適合特殊研究的需要。。標注組件也意味著如果你是需要將現有設備淦?，或諊银行系统升级，或者是完整祬蠕套产屏P愣賈恍枰郝蛐枰墓辜?/SPAN>HSE-HA生理學系統為你提供各種工具，使你的研究走向多產和成功。
我們提供大多數生理學檢測設備，包括放大器、電極、傳感器和電化學檢測器。參數包括力、位移、壓力、液體和氣體流、心電圖（單導聯—12導聯系統）、MAP（單個或多個部位）、腦電圖、肌電圖、連續支流灌注傳統的血?dú)鈪?shù)和電解質的分析，可以選擇程序化軟件和傳統的刺激器作為放大器、電極和傳感器等產品的補充。
HSE-DAQ系統產品家族（BDAS、ACAD、HAEMODYN、ISOHEART、PULMODYN、PENNOCK）可以記錄你的初始信號，計算到處的參數，注釋數據，快速簡易的輸入確定的數據用于分析。同時還可以選擇用于進一步分析的軟件模塊，帶狀記錄紙打印，自動和控制模塊等。產品經過預先設置，打開包裝即可使用，并專門設計符合你的系統配置和數據分析要求。
• For use in physiological or pharmacological research for the perfusion of a pig liver or kidney with blood or erythrocyte containing perfusate
Basic System
The pig liver to be perfused is placed in a moist, thermostated chamber and perfused with blood through the portal vein under constant-flow conditions. A centrifugal pump with a gentle action on blood is employed to reduce hemolysis; it is controlled by an electronic controller (SCP) so that the apparatus can be operated under constant-flow conditions. The system can also operate under constant-pressure conditions. Flow control requires that the flow is measured by means of a flow probe (16N) and a flowmeter (TTFM).
The pressure should also be measured to monitor the experiment. This requires a pressure transducer (P75) and a bridge amplifier (TAM). A suitable oxygenator is employed for oxygenating and warming the blood; it can be of a type used in human medicine, e.g. Terumo Capiox SX10®.
Components required
The following items are required for operating the apparatus:
• Thermostated moist chamber Type 869/2
• Circulating thermostat of approx. 3 liter capacity, distilled water and an anti-algal agent, e.g. Thermoklar
• Pump with electrical control. For blood we recommend a Pump Drive BVP-ZX with centrifugal pump head, see the Pump Section A
• Servo Controller for Perfusion (SCP) Type 704, see page K12
• Flowmeter (TTFM) with flow probe (16N), see pages J6 and J7
• Recommended: pressure transducer (P75), see page J3 and bridge amplifier (TAM-D), Section I of this Catalog
• Oxygenator with heat exchanger, e.g. Terumo Capiox SX10®
• Source of Carbogen for aeration. Central supply or Carbogen cylinder with pressure reducing valve
Additional monitoring equipment can be added to the system as required to create a custom, application specific, turn key system for your unique research needs.