深圳市灣邊貿易有限公司供應美國KROHN-HITE model 6620a 相位儀。
Model 6620A Precision Phasemeter ? Accuracy: Typically 0.02° ? Resolution: 0.01° ? GPIB Programmable ? Automatic Ranging Display ? Automatic Voltage Ranging ? Input Voltage Range: ? 10mV rms to 320V rms ? Deviation Measurements ? Accepts Any Waveform ? Analog Output ? Automatic Meter Correct (AMC)
PERFORMANCE The Model 6620A provides precision phase measurements with a typical accuracy of 0.02° and a resolution of 0.01° over most of the frequency range. It will accept a wide range of input signal levels from 10mVrms to 320V rms and input waveforms including sine, square and pulses. A 5 digit LED display provides continuous direct readout of phase angles between 0.00° and 360.00° or ±180°. These two ranges can be manually or automatically selected. UNIQUE DESIGN Two common factors that will affect the accuracy of a phasemeter are distortion and/or broadband noise present on either or both of the input signals. A unique circuit design used in the 6620A significantly reduces any effects that may be caused by these two factors. Another problem found in most phasemeters is the inability to respond to very small phase angles, resulting in fluctuations or inconsistencies in the meter reading (sometimes referred to as ambiguity). To overcome this problem, the 6620A uses a design that eliminates any ambiguities that may occur at readings near 0°, 180° and 360°, and allows measurements as small as 0.01° to be made
ACCURACY Sinewave: Input Volts (rms) Frequency Range Accuracy 10mV to 32mV 1Hz to 10kHz 0.2o 10mV to 100mV 10kHz to 50kHz 0.35o 50kHz to 10MHz 0.7o/100kHz 32mV to 100V 1Hz to 10Hz 0.1o 10Hz to 10kHz 0.05o 100mV to 100V 10kHz to 50kHz 0.05o 50kHz to 100kHz 0.35o 100kHz to 10MHz 0.35o/100kHz 100V to 320V 1Hz to 10Hz 0.2o 10Hz to 5kHz 0.1o Squarewave: Double the specificatio
源自：深圳市灣邊貿易有限公司