| VERTICAL | 
        
            | Channels | 2 | 
        
            | Bandwidth | DC ~ 60MHz (-3dB) | 
        
            | Rise Time | 5.8ns Approx. | 
        
            | Sensitivity | 2mV/div ~ 5V/div (1-2-5 increments) | 
        
            | Accuracy 
 | ∮(3% x |Readout|+0.05 div x Volts/div+0.8mV) | 
        
            | Input Coupling | AC, DC & Ground | 
        
            | Input Impedance 
 | 1M∮2%, ~16pF | 
        
            | Polarity | Normal & Invert | 
        
            | Maximum Input 
 | 300V (DC+AC peak), CATII | 
        
            | Waveform Signal Process | + , - , FFT | 
        
            | Offset Range 
 | 2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V | 
        
            | Bandwidth Limit | 20MHz (-3dB) | 
        
            | TRIGGER | 
        
            | Sources | CH1 , CH2 , Line , EXT | 
        
            | Modes 
 | Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay, Event-delay | 
        
            | Coupling | AC , DC , LF rej. , HF rej. , Noise rej. | 
        
            | Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV 25MHz ~ 60MHz : Approx. 1div or 10mV
 | 
        
            | EXT TRIGGER | 
        
            | Range | 15V | 
        
            | Sensitivity | DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV | 
        
            | Input Impedance | 1M∮2% , ~ 16pF | 
        
            | Maximum Input | 300V (DC AC peak) , CATII | 
        
            | HORIZONTAL  | 
        
            | Range | 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div | 
        
            | Modes | MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y | 
        
            | Accuracy | ∮0.01% | 
        
            | Pre-Trigger | 20 div maximum | 
        
            | Post-Trigger | 1000 div | 
        
            | X-Y MODE | 
        
            | X-Axis Input | Channel 1 | 
        
            | Y-Axis Input 
 | Channel 2 | 
        
            | Phase Shift | ∮3 at 100kHz | 
        
            | SIGNAL ACQUISITION
 | 
        
            | Real-Time Sample Rate | 1GSa/s maximum | 
        
            | Equivalent Sample Rate | 25GSa/s maximum | 
        
            | Vertical Resolution | 8 Bits | 
        
            | Record Length | 25K Dots maximum | 
        
            | Acquisition Mode 
 | Normal, Peak Detect, Average | 
        
            | Peak Detection 
 | 10ns | 
        
            | Average 
 | 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 | 
        
            | CURSORS AND MEASUREMENT | 
        
            | Voltage Measurement | Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot | 
        
            | Time Measurement | Freq , Period , Rise Time , Fall Time , Positive Width , NegativeWidth , Duty Cycle | 
        
            | Delay Measurement 
 | Eight different delay measurement | 
        
            | Cursors Measurement | Voltage difference between cursors (V) Time difference between cursors (T) | 
        
            | Auto Counter 
 | Resolution : 6 digits Accuracy : ∮2%
 Signal Source: All available trigger source except the Video trigger mode
 | 
        
            | CONTROL PANEL FUNCTION
 | 
        
            | Autoset | Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically | 
        
            | Save Setup | Up to 20 sets of measurement conditions | 
        
            | Save Waveform 
 | 24 sets of waveform | 
        
            | DISPLAY
 | 
        
            | TFT LCD Type | 5.6 inch | 
        
            | Display Resolution 
 | 234 (Vertically) x 320 (Horizontally) Dots | 
        
            | Display Graticule 
 | 8 x 10 divisions ; 8 x 12 divisions (menu off) | 
        
            | Display Brightness 
 | Adjustable | 
        
            | INTERFACE
 | 
        
            | Go/NoGo Output | 5V Maximum/10mA TTL Open Collector Output | 
        
            | RS-232 Interface | DB 9-pin male DTE RS-232 interface | 
        
            | GPIB Interface (Option) | Fully programmable with IEEE 488.2 compliance | 
        
            | USB | USB Host/Device 2.0 full speed supported | 
        
            | POWER SOURCE
 | 
        
            | Line Voltage Range 
 | AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection | 
        
            | Battery Power(Option) 
 | Battery : 11.1V Li-Ion battery pack Charge Time : 8 hours (Power ON)
 Operating Time : 3 hours , depending on operating condition
 | 
        
            | MISCELLANEOUS
 | 
        
            | Multi-Language Menu | Available | 
        
            | Online Help | Available | 
        
            | Time Clock | Time and Date, Provide the Date/Time for saved data | 
        
            | DIMENSIONS &WEIGHT | 254D x 142H x 310W(mm) Approx. 4.3kg
 |