- 如果您對該產品感興趣的話，可以
- 產品名稱：Yokogawa Analog I/O Module NFAI835-S50
- 產品型號：NFAI835-S50
- 產品展商：Yokogawa
- 產品文檔：無相關文檔
簡單介紹
Yokogawa Analog I/O Module NFAI835-S50, Yokogawa Analog I/O Module NFAI835-S50, 4 to 20mA, 4-channel input/4-channel output, Isolated channels.
產品描述
Manufacturer: Yokogawa Electric Corporation
STARDOM: FCN, FCN-500, FCN-100, FCN-RTU, FCJ
Yokogawa Analog I/O Module NFAI835-S50
Standard Specifications
Current Input Module and Current I/O Module (Isolated Channels)
The Current Input Module receives signals of 4 to 20 mA. The Current I/O Module receives and outputs signals of 4 to 20 mA. These two modules are isolated between the input/output signals and the system as well as between channels.
Yokogawa Analog I/O Module NFAI835-S50
|
Items
|
Specifications
|
|
Model
|
NFAI135 (*5) (*8)
|
NFAI835 (*5) (*8)
|
|
Number of I/O channels
|
8-channel input, isolated channels
|
4-channel input/4-channel output, isolated channels
|
|
I/O signal
|
4 to 20 mA
|
Input: 4 to 20 mA
|
Output: 4 to 20 mA
|
|
Allowable input current
|
25 mA
|
25 mA
|
—
|
|
Overcurrent protection
|
Provided
|
Provided
|
—
|
|
Withstanding voltage (*7)
|
Between input/output and system: 500 V AC for 1 minute, between channel: 500 V AC for 1 minute
|
|
Input resistance
|
Power ON
|
250 Ω (*1)
|
|
Power OFF
|
500 kΩ or more
|
|
Allowable load resistance
|
—
|
—
|
0 to 750 Ω
|
|
Circuit-open detection
|
—
|
—
|
0.65 mA or less
|
|
Accuracy
|
±0.1% of full scale
|
Inputs: ±0.1% of full scale
|
Outputs: ±0.3% of full scale
|
|
Data refresh cycle
|
10 ms
|
|
Input step response time
|
100 ms
|
100 ms
|
—
|
|
Output step response time
|
—
|
—
|
100 ms
|
|
Output fallback (*4)
|
—
|
—
|
Set for each channel(*3)
|
|
Transmitter power supply
|
20.2 to 29.3 V (*2)
|
20.2 to 29.3 V(*2)
|
—
|
|
Temperature drift
|
Max. ±0.01%/°C
|
|
Maximum current consumption
|
360 mA(5 V DC)
|
360 mA(5 V DC)
|
|
450 mA (24 V DC)
|
450 mA (24 V DC)
|
|
Weight
|
0.3 kg
|
|
External connection
|
Pressure clamp terminal, MIL connector cable (*7)
|
|
HART Communication(*6)
|
Available
|
Available
|
*1: A voltage drop by up to 0.8 V may occur due to the internal protection circuit.
*2: Depends on the actual voltage applied by analog field power supply (24 V DC) via base module.
*3: HOLD: To hold output in which fallback is detected.
SETV: To output a specified value when fallback is detected.
*4: Select fallback [Yes/No] for each module.
If [Yes] is selected for fallback, set [HOLD/SETV] for each channel.
Fallback detection time: 4 seconds. Yokogawa Analog I/O Module NFAI835-S50
*5: When this I/O module is used, 24 V DC needs to be supplied to an analog field power supply terminal of the power supply module.
*6: For HART function specifications, refer to GS 34P02Q53-01E HART Communication Functions.
*7: The withstanding voltage for using MIL connector cable depends on the electrical specifications of its cable. If you are using KMS40 cable, withstanding voltage of between input and system is 500 V AC for 1 minute. Yokogawa Analog I/O Module NFAI835-S50
*8: A Zener barrier is not allowed to be connected with this module. Use an isolation barrier when the module is used in intrinsically safe application.
Models and Suffix Codes
Yokogawa Analog I/O Module NFAI835-S50
|
|
|
Description
|
|
Model
|
NFAI835
|
Analog I/O Module (4 to 20mA, 4-channel input/4-channel output, Isolated channels)
|
|
Suffix Codes
|
-S
|
Standard type
|
|
-H
|
With HART Communication
|
|
5
|
With no explosion protection
|
|
E
|
With explosion protection
|
|
0
|
Basic type
|
|
1
|
With ISA Standard G3 option
|
|
OptionCodes
|
/13S00
|
With Pressure Clamp Terminal Block for Analog [Model: NFTI3S-00]
|
|
/13S10
|
With Pressure Clamp Terminal Block for Analog (surge absorber) [Model: NFTI3S-10]
|
|
/CCC01
|
With Connector Cover for MIL Cable [Model: NFCCC01]
|
