- 如果您對該產品感興趣的話，可以
- 產品名稱：RTD Input Multiplexer Module AMM32CJ Yokogawa
- 產品型號：AMM32CJ
- 產品展商：Yokogawa
- 產品文檔：無相關文檔
簡單介紹
Yokogawa Electric Corporation, RTD Input Multiplexer Module AMM32CJ Yokogawa, RTD Input Multiplexer Module AMM32CJ Yokogawa, for CENTUM CS 3000 and CENTUM CS 1000 systems. Please contact us: tekrachel @ 163.com
產品描述
RTD Input Multiplexer Module AMM32CJ Yokogawa
The specifications of I/O Modules and I/O Module Nests (for RIO) for CENTUM CS 3000 and CENTUM CS 1000 systems.
RTD Input Multiplexer Module AMM32CJ Yokogawa
l Multiplexer Module
RTD Input Multiplexer Module AMM32CJ Yokogawa
These modules receive up to 16 points from DC voltage, mV, thermocouple and RTS. Measuring inputs can be specified per point.
RTD Input Multiplexer Module AMM32CJ Yokogawa
|
Item
|
Specifications
|
|
Model
|
AMM12T AMM12C
|
AMM22M AMM22C
|
AMM22T AMM22TJ (*2)
|
AMM32T AMM32CJJ (*3) AMM32C AMM32CJ (*3)
|
AMM25C (*2)
|
|
Input
|
16
|
16
|
16
|
16
|
15
|
|
Input signal
|
DC voltage
|
mV
|
Thermocouple IEC Standard Type K, T, J, E, B, R,
IEC Standard
Type N
|
RTD
JIS JPt100 or JIS Pt100 (DIN Pt 100)
3-wire type
|
Termocouple IEC Standard Type K, T, J, E, B, R, S
IEC Standard Type N, mV. Channel 16 is used for RJC port.
|
|
Input range
|
-10 to 10 V DC
|
-100 to 100 mV DC
|
-100 to 100 mV DC
|
-200 to 600°C
|
-100 to 100 mV
|
|
Allowable input voltage
|
-30 to 30 V DC
|
-0.5 to 4.0 V DC
|
-0.5 to 4.0 V DC
|
-
|
-0.5 to 4.0 V DC
|
|
Input resistance
|
1 M?
|
-
|
1 M?
|
|
Signal isolation
|
Input signals are isolated between systems. Withstanding voltage: 1500 V AC/min
|
|
Data update period
|
1 s
|
|
Accuracy
|
±4 mV
|
±40 μV
|
±40 μV
|
±0.15 ?
|
±40 μV
|
|
Burnout detection
|
-
|
Select from UP/DOWN/OFF.
|
|
Input parallel connection
|
Permitted (burnout OFF)
|
Not permitted
|
Permitted (burnout OFF)
|
|
How installed
|
Installed in the I/O module nest.
|
|
How connected
|
Connected to the terminal of the I/O module with M4 screws. Use a KS1, KS2 or KS3 cable for AMM12C, a
KS1 cable for AMM22C/AMM25C, and a KS8 cable for AMM32C.
|
|
Effect of ambient tem- perature change
|
For 10 °C change :
DC voltage: ±8 mV or less mV input: ±80 μV or less
Thermocouple input: ±80 μV or less RTD Input: ±0.3 ? or less
|
For 10 °C change :
±80 μV or less
|
|
Current consumption
|
500 mA or less (5.0 V DC)
|
|
How input signals are specified
|
Specify input signals and range by software setting.
|
*1: If measured temperature is lower than 0 °C, multiply
the above value by the following coef?cient (K): RTD Input Multiplexer Module AMM32CJ Yokogawa
*2: AMM22TJ and AMM25C conform to IEC584-1995.
*3: AMM32CJJ and AMM32CJ
conform to IEC751-1995.
