Manufacturer: Yokogawa Electric Corporation
Yokogawa Zirconia Oxygen Converter ZR402G-T-E-E-A
Features
Yokogawa ZR402G Separate type Zirconia Oxygen Analyzer, Converter
Yokogawa Zirconia Oxygen Analyzer ZR402G-T-E-E-A
? The built-in heater assembly of the probe can be replaced on site, reducing maintenance costs.
? The probe uses a long-life, high-reliability Zirconia sensor.
? The probe uses three-reference gas supply methods (natural air convection, instrument air, and pressure compensated) in its applications.
? The separate type converter incorporates a LCD touch screen for ease of operation.
? This converter can be used as an oxygen analyzer as well as a high temperature humidity analyzer.
? The integrated type integrates both probe and converter, to reduce wiring, piping, and installation costs. This type of unit uses an optical switch for ease of operation at the site.
?Remote maintenance using digital communications (HART) reduces maintenance costs.
Model and Suffix Codes
Yokogawa ZR402G Separate type Zirconia Oxygen Analyzer, Converter
Yokogawa Zirconia Oxygen Analyzer ZR402G-T-E-E-A
Model - - - - - - - - ZR402G, Separate type Zirconia Oxygen Analyzer, Converter
-P - - - - - - G1/2
-G- - - - - - Pg13.5
-M - - - - - - M20x1.5
-T - - - - - - 1/2NPT
Display
-J - - - - - - Japanese
-E - - - - - - English
-G - - - - - - German
-F - - - - - - French
-C - - - - - - Chinese
Instruction manual
-J - - - - - - Japanese
-E - - - - - - English
-C - - - - - - Chinese
-A - - - - - - Always -A
Option
/HS, Set for Humidity Analyzer (*1)
/H, Hood (*3)
Tag plate
/SCT, Stainless steel tag plate (*2)
/PT, Printed tag plate (*2)
NAMUR NE43 complian
/C2, Failure alarm down-scale: Output status at CPU failure and hardware error is 3.6 mA or less (*4)
/C3, Failure alarm up-scale: Output status at CPU failure and hardware error is 21.0 mA or more (*4)
*1 For humidity measurements, be sure to specify /HS options.
*2 Specify either /SCT or /PT option code.
*3 Sun shield hood is still effective even if scratched.
*4 Output signal limits: 3.8 to 20.5 mA. Specify either /C2 or /C3 option code.
(Note) If AC line voltage is 125 V AC or greater, or in the EEC, the ZO21D cannot be used with the ZR402G.
