深圳市博納德精密儀器有限公司
新聞詳情
E14燈頭焊錫高度規，7006-27G-1，E14燈頭燈座量規
日期：2025-10-31 16:52
瀏覽次數：1003
摘要：
E14燈頭焊錫高度規7006-27G-1
目的：
PURPOSE:
檢驗成品燈上E14燈頭尺寸S1的*大值和*小值。
To check the deminsion S1
minimum and S1 maxiimum of E14 caps on
finished lamps.
檢驗：
TESTING:
當成品燈的燈頭完全插入量規時，柱塞的W面應與X面共面或凸出X面，但不應凸出Y面。
When the cap on a finished lamp
has been pushed into the gauge as far as it will go, the plunger surface W
shall be co-planar with or project byond surface X but it shall not ...
E14燈頭焊錫高度規7006-27G-1
目的：
PURPOSE:
檢驗成品燈上E14燈頭尺寸S1的*大值和*小值。
To check the deminsion S1 minimum and S1 maxiimum of E14 caps on finished lamps.
檢驗：
TESTING:
當成品燈的燈頭完全插入量規時，柱塞的W面應與X面共面或凸出X面，但不應凸出Y面。
When the cap on a finished lamp
has been pushed into the gauge as far as it will go, the plunger surface W
shall be co-planar with or project byond surface X but it shall not project
beyond surface Y.
