PTL Pendulum Impact-Test Apparatus F40.25德國PTL擺錘沖擊測試機IEC 60068-2-75
PTL擺錘沖擊測試裝置
用途：用來測試沖擊能量從0.14J到達1.0J時機械的強度。
符合標準：
IEC 60068-2-75/1997-08§4.2，Tab.1和Tab.2 ，類似于Annex D
按照Table 1，注入元素? 18,5 mm，等同于質量0.25kg，
沖擊能量和下落高度根據Table2
標準設備：
鋼管擺手臂，外徑9mm，管壁厚度0.5mm，鐘擺有效長度1000±1mm
注入元素質量200g，球臺形尼龍注入半徑10mm,洛氏硬度85≤HRR≤100
基本框架: 高1270mm，寬200mm，有螺絲孔用于安裝在墻壁上
延伸手臂:垂直可調，擺樞軸水平可調
延伸手臂，垂直可調, 有擺錘釋放機制，下降高度規模水平可調
安裝夾具：符合IEC60068-2-75/1997-08 Annex D Fig. D.3.
鋼塊：170mm×210mm×35mm，質量10kg，
夾具可向兩邊移動，沿矩形中心軸向膠合板旋轉每次旋轉90°
設計：基本框架涂有白色油漆，鋼部分為棕色或鍍鎳，部分材料為不銹鋼
型號：F 40.25
配件：
和標準IEC 60068-2-75/1997-08 Annex D Fif. D.4 相同
用來測試平整式樣品，原材料為山毛櫸木材，125mm×125mm×50mm ,鉆孔直徑65mm,置于規格為175mm×175mm×8mm的膠合板上。
型號： F 40.63
PTL Pendulum Impact-Test Apparatus
to test the mechanical strength with impact energies of 0,14 J up to 1,0 J
according to IEC 60068-2-75 :1997-08 § 4.2 Table 1 and Table 2, similar Annex D.
Striking element according to Table 1, ? 18.5 mm, equivalent mass 0.25 kg, impact energies and
heights of fall according to Table 2.
Standard Outfit:
tubular pendulum arm of steel, external diameter 9 mm, wall thickness 0.5 mm, pendulum length 1 000 ±1 mm effective, striking element, mass 200 g, spherical segment-shaped polyamide insert R 10 mm, 85 ≤ HRR ≤ 100 Rockwell hardness, base frame, height 1 270 mm, width 200 mm, with bores
for screws for mounting on a wall, extension arm, vertically adjustable, with horizontally
adjustable pendulum pivot, extension arm, vertically adjustable, with release mechanism for the pendulum, scale for height of fall horizontally adjustable, Mounting Fixture according to IEC 60068-2-75:1997-08
Annex D Fig. D.3, with steel block 175 mm x 210 mm x 35 mm, mass 10 kg, turn able around its vertical axis and to be clamped with tommy screws, sheet of plywood 175 mm x 175 mm x 8 mm, in clamping rails moveable to the sides and to be turned in steps of 90° around its central axis rectangular to the sheet of plywood. Design: Base frame papyrus-white structure varnished, steel parts black-oxide-finished or made of stainless steel,
Article No.: F 40.25
Accessory:
Mounting Block similar to IEC 60068-2-75:1997-08 Annex D Fig. D.4, for testing flush-type specimens, made of beech 125 mm x 125 mm x 50 mm, with through bore diameter 65 mm, on plywood sheet 175 mm x 175 mm x 8 mm,
Article No.: F 40.63
香港奧德賽創科技有限公司
深圳市奧德賽創精密儀器有限公司
FAX: +86(755)26978981
Mobile: +86—
E-mail: scl@hkauto.com.cn
www.hkautosz.com