確定在絕緣線溫度低的彎曲穩(wěn)定性電纜達12.5毫米直徑在冷態(tài)試驗室或冷藏柜與心軸直徑50毫米

according to IEC 60811-1-4
:1985 + Corr. 1986 + A1:1993 + A2:2001 § 8.1 and § 8.2 Fig. 1,
 
VDE 0473 Part 811-1-4 :2002-09 § 8.1 and § 8.2 Fig. 1.


Standard outfit:
rigid trestle,
driving shaft, with two bearings, with bush to take up
the mandrel, with pivot for the actuating shaft,
gear transmission 1:3, transmission shaft with two
bearings, with pivot for the actuating shaft,
counter bearing for the mandrel, with quick acting
closure,
guide bar, diameter 20 mm, distance to the mandrel
adjustable,
to 3 metal tubes, swivel-mounted, distance of the
swivel axis from the mandrel axis approx. 270 mm,
actuating shaft for attaching on the pivots, 450 mm
long, with hand wheel.
Design:
Steel parts back-oxide-finished, all bearing bushes manufactured of brass, some small
parts of stainless steel, total width maximally 235 mm, total length in direction of metal
tube axis maximum 510 mm plus protruding sample,

香港奧德賽創(chuàng)科技有限公司

深圳市奧德賽創(chuàng)精密儀器有限公司

FAX: +86(755)26978981

Mobile: +86—

E-mail: scl@hkauto.com.cn