- 入駐時間： 2013-07-04
- 聯系人：熊頂芳
- 電話：0574-27868496
-
聯系時，請說明易展網看到的
- Email：18157427371@163.com
經濟型粉末電阻率測試儀
型號及技術指標Models and technical indicators：
經濟型粉末電阻率測試儀
|
規格型號 model |
FT-300I |
FT-300II |
FT-300III |
FT-300Ⅳ |
|||
|
1.電阻resistance |
10-7～2×107Ω |
10-6～2×106Ω |
10-5～2×106Ω |
10-4～1×105Ω |
|||
|
2.電阻率范圍Resistivity |
10-7～2×107Ω-cm |
10-6～2×106Ω-cm |
10-5～2×106Ω-cm |
10-4～1×105Ω-cm |
|||
|
3.電導率Conductivity |
5×10-7～107s/cm |
5×10-6～106s/cm |
5×10-6～105s/cm |
5×10-5～104s/cm |
|||
|
4.測試電流范圍 current |
1μA，10μA，100μA，1mA，10mA，1000mA |
1μA，10μA，100μA，1mA，10mA， |
|||||
|
5.測量電壓量程Voltage |
測量電壓量程 voltage：2mV 20mV 200mV 2V 測量精度Accuracy±（0.1%讀數） 分辨率 Resolution： 0.1uV 1uV 10uV 100uV |
||||||
|
6.電流精度Current |
±0.1%Accuracy |
±0.2% Accuracy |
±0.2% Accuracy |
±0.3% Accuracy |
|||
|
7.電阻精度Resistance Accuracy |
≤0.3%標準電阻resistance |
≤0.3%標準電阻resistance |
≤0.3%標準電阻resistance |
≤0.5%標準電阻 standard resistance |
|||
|
8.顯示讀數display |
液晶顯示：電阻值、電阻率、電導率值、溫度、壓強值、單位自動換算、橫截面、高度，超上下限警報 LCD: resistance, resistivity, conductivity, temperature, pressure value, the unit automatically conversion, cross-section, height，Super and upper limit alarm |
||||||
|
9.測試方式Test mode |
四端測量法Four-terminal measurement method |
||||||
|
10.傳感器壓力Pressure Sensors |
200kg；(其他規格可以定制) (Other specifications can be customized) |
||||||
|
11.粉末測量裝置 Powder measuring device |
模具Mold：內徑inner diameter 10mm； 20mm（選購）, height: 25mm, 加壓方式：手動液壓加壓測量 pressure: manual hydraulic pressure / automatic compression mode (purchase). |
||||||
|
12.工作電源power supply |
輸入: AC 220V±10% ,50Hz 功 耗Power consumption：<30W |
||||||
|
13.外形尺寸/dimensions |
主機Mainframe：約L330mm*D350mm*H120mm ;手動裝置about：約H450mm*L200mm*D120mm |
||||||
|
14.凈重量/Net Weight |
約35kg About 35kg |
||||||
|
15. 標配外選購Others buy |
a.標準校準電阻1-5個；b.PC軟件一套；c.電腦和打印機依據客戶要求配置；d.計量證書1份 ，e. 高度校準塞規1個 a. Standard calibration resistor 1-5. b.PC software 1 set c. computers and printers based on customer configuration requirements. d. Measurement certificate 1. e. Height calibrated plug gauge 1 pcs |
||||||
步驟及流程
1.運行高度清零.
2.將稱重樣品裝入模腔.
3.固定上電極旋鈕.
4.在顯示器上設置好參數.
5.達到設定壓力或壓強值.
經濟型粉末電阻率測試儀
6.讀取樣品壓縮高度數據并輸入.
7.獲得電阻、電阻率、電導率數據.
8.記錄數據.
9. 樣品脫模
7. 測試結束.
經濟型粉末電阻率測試儀
