Servomex仕富梅微量氮分析儀K2001校準步驟中文操作手冊說明書

1:General description微量氮分析儀概述

The SERVOPRO PLASMA Analyzer is an instrument for measuring 0 to 100 ppm nitrogen in argon . This analyzer is designed to work with pure gas.（K2001微量氮分析儀是用來測量純氬中的微量氮的）

2:Sampling樣品氣體進入Servomex仕富梅微量氮分析儀K2001校準步驟中文操作手冊說明書

The argon sample is introduced through a 1/8” tube Swagelok fitting at the rear of the cabinet . Never block the vent ,or permanent damage will result to flow transducer. Leave vent at atmospheric pressure（樣品氣的引入如下圖。強調樣品氣出口一定不能有背壓）

3:Power supply電源電壓Servomex仕富梅微量氮分析儀K2001校準步驟中文操作手冊說明書

The utility power supply must be stable and transient-free for a reliable operation of the analyzer. The system has two fuses . The analyzer has one power supply module delivering D.C. regulated voltage to the signal conditioning module, the microprocessor system display and the flow control module.（要求有穩定的電壓保證儀表正常運行）

Sample stream selection system（可以接受的樣品選擇系統）

操作流程：

All analyzer function are controlled through different menu options. The following figures in this section show the overall menu structure.

At power on, the analyzer displays the MAIN MENU（上電開機后主菜單如下圖）：

1: Configuration(F1配置菜單請參考下圖)Servomex仕富梅微量氮分析儀K2001校準步驟中文操作手冊說明書

a: F1-You have to decide whether or not to use “automatic ranging”(選擇是否啟用自動量程)。

b: You enter your desired sample flow value simply by using the number keys and confirming your value with the “E” key for enter . The flow unit is cc/m.（直接用鍵盤數字輸入流量，單位是毫升每分鐘）

c: F2-by pressing the “F2” key, the analog 4-20 mA output（選擇4-20mA輸出模式）。

由于篇幅有限，Servomex仕富梅微量氮分析儀K2001校準步驟只能先介紹到這里，后續的步驟你可以電話埃登威上海公司啊021-55581219

Servomex仕富梅微量氮分析儀K2001校準步驟中文操作手冊說明書