美國MOUNTZ蒙士扭矩傳感器SDX10i (078000)

美國MOUNTZ蒙士扭矩傳感器SDX10i (078000)

• Torque Sensors for auditing or tightening fasteners to a specified torque when mated with a torque analyzer.
• Ergonomic rubber grip and stainless steel Female/Hex bit holder.
• Features “ARC II” technology, an instant auto-recognition system of the SDX connected to the FTA-100, LTT or PTT.
• Connect to a torque analyzer to monitor, test or audit a fastener.
• Safe Overload: 125% of Rated Output.
• Length x Width ( 6” x  1 1/2”)
• Weight 0.5 lbs
• Accuracy ± .25% of full scale*.

Note: * This is the stand alone accuracy for the torque sensor. When the torque sensor is coupled with a Mountz torque analyzer, there is a system accuracy. Review the system accuracy listed with each torque analyzer (FTA-100, PTT or LTT).

Certified: Supplied with NIST-Traceable Certification of Calibration

SDX Pin Connection A = Signal (+) B = Signal (-) C = Excitation (-) D = Excitation (+) E/F = N/A

美國MOUNTZ蒙士扭矩傳感器SDX10i (078000)

美國MOUNTZ蒙士扭矩傳感器SDX10i (078000)

美國MOUNTZ蒙士扭矩傳感器SDX10i (078000)

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!