培養方法

傳代方法 將舊培養液吸除，PBS清洗兩遍后，加入6mL（/100mm皿）胰酶，在顯微鏡下觀察，期間禁止搖晃培養皿，細胞剛有脫落時，則吸除大部分胰酶，留約0.5mL，移至培養箱消化，約2min取出。傳代用12mL CM1-1培養液終止消化，輕輕吹打均勻細胞，后可分3~6皿培養；

生長條件 37℃，5%CO2，CM1-1培養液。CM1-1培養液：90%DMEM-H+10%FBS。DMEM-H：DMEM高糖培養液，含谷氨酰胺，含丙酮酸鈉。

存儲條件 凍存則用6mL凍存液（90%FBS+10%DMSO）終止消化，吹打均勻，分為6支凍存管，用程序降溫盒于-80℃凍存，過夜轉移至液氮中保存。

我司常期代理ATCC Acris  abcam  cst  Biorbyt  santa  Novus  sigma  lifespan  NEB  roche  ABI  R&D millipore   BD  Qiagen Cayman  Jackson Life  GeneTex   Bio-Rad DSHB  tocris   peprotech 等品牌；部分產品現貨，超低比價，貨期短，價格優，公司產品僅用于科研售后齊全。

培養操作步驟 ：

1．用蓋片鑷將蓋玻片自75%乙醇中取出，用無菌絲綢布擦拭干凈，不要用紗布； 

2．將蓋玻片輕輕放入6孔培養板（每孔一片）或培養皿中（每個平皿可放置2-3片）； 

3．在距離紫外燈直射范圍內20-30 厘米處照射2-3小時； 

4．將經過計數的細胞懸浮液移入培養板中，使蓋玻片完全浸在培養液中； 

5．將培養板在5% CO2水浴孵箱中37℃孵育2-3天，當貼壁細胞生長至覆蓋培養板底部2/3面積時，將培養板取出，用蓋片鑷輕輕取出蓋玻片，用蒸餾水漂洗后即可進行快速固定以及細胞化學檢測。 

細胞培養方法：

1、細胞傳代：細胞密度達到80-90%時即可傳代

①棄去培養上清，用PBS或生理鹽水清洗1-2次；

②加入2ml0.25%胰酶（T25瓶），使胰酶覆蓋整個瓶或皿，蓋好放入培養箱消化；

③1-2min后，顯微鏡下觀察細胞，若大部分細胞回縮且有少量細胞脫落，輕輕吹打下確認消化情況后加入完全培養基終止消化；若細胞還是貼壁，放回培養箱繼續消化至可以輕輕吹打下為止；

④將細胞懸液1000RPM左右條件下離心4min，棄上清；

⑤用新鮮培養基重懸后加入培養瓶或皿中，T25培養瓶加6-8ml培養基；

⑥懸浮細胞直接離心收集，細胞沉淀重懸后分到新培養瓶中。

2、細胞復蘇：

①將凍存管在37℃溫水中快速搖晃融化，時間1min左右，加入4-5ml培養基混勻。

②在1000RPM左右條件下離心4min，棄上清,加1-2ml培養基吹勻，將細胞懸液加入培養瓶中，補加適量培養基。

3、細胞凍存：待細胞生長狀態良好時進行細胞凍存保種

①棄去培養上清，用PBS或生理鹽水清洗1-2次，加入1mL 0.25%胰蛋白酶（T25瓶）

②1-2min后，顯微鏡下觀察細胞，大部分細胞回縮且有少量細胞脫落，輕輕吹打下確認消化情況后加入完全培養基終止消化；

③將細胞懸液1000RPM左右條件下離心4min，棄上清，加1ml凍存液重懸細胞；

④將凍存管放入程序降溫盒，放入-80℃冰箱，4小時后將凍存管轉入液氮罐儲存。

性    狀  Lyophilized or Liquid

免 疫 原  KLH conjugated Synthesised phosphopeptide derived from human PRKD3 around the phosphorylation site of Ser41 [RL(p-S)NG]

亞    型  IgG

純化方法  affinity purified by Protein A

儲 存 液  0.01M PBS, pH 7.4 with 10 mg/ml BSA and 0.1% Sodium azide

產品應用   WB=1:100-500  ELISA=1:500-1000  IP=1:20-100  IHC-P=1:100-500  IHC-F=1:100-500  IF=1:100-500

（石蠟切片需做抗原修復）

 not yet tested in other applications.

 optimal dilutions/concentrations should be determined by the end user.  

保存條件  Store at -20 °C for one year. Avoid repeated freeze/thaw cycles. The lyophilized antibody is stable at room temperature for at least one month and for greater than a year when kept at -20°C. When reconstituted in sterile pH 7.4 0.01M PBS or diluent of antibody the antibody is stable for at least two weeks at 2-4 °C.

Important Note  This product as supplied is intended for research use only, not for use in human, therapeutic or diagnostic applications.

產品介紹 Protein kinase C (PKC) is a family of serine and threonine specific protein kinases that can be activated by calcium and the second messenger diacylglycerol. PKC family members phosphorylate a wide variety of protein targets and are known to be involved in diverse cellular signaling pathways. PKC family members also serve as major receptors for phorbol esters, a class of tumor promoters. Each member of the PKC family has a specific expression profile and is believed to play a distinct role. The protein encoded by this gene is one of the PKC family members. This kinase can be activated rapidly by the agonists of G protein coupled receptors. It resides in both cytoplasm and nucleus, and its nuclear accumulation is found to be dramatically enhanced in response to its activation. This kinase can also be activated after B cell antigen receptor (BCR) engagement, which requires intact phopholipase C gamma and the involvement of other PKC family members.

Function : Converts transient diacylglycerol (DAG) signals into prolonged physiological effects, downstream of PKC. Involved in resistance to oxidative stress.

Subcellular Location : Cytoplasm. Membrane. Note=Translocation to the cell membrane is required for kinase activation.

Tissue Specificity : Ubiquitous.

Similarity : Belongs to the protein kinase superfamily. CAMK Ser/Thr protein kinase family. PKD subfamily.

Contains 1 PH domain.

Contains 2 phorbol-ester/DAG-type zinc fingers.
膽囊上皮細胞孕二檢測試劑盒N,N'-琥珀酰亞基碳酸酯 98%正戊烷 for HPLC, ≥99.0%

孕誘導阻斷因子檢測試劑盒1,2-二甲基咪唑 99%吡啶 for HPLC, ≥99.9%

孕酮檢測試劑盒4,5-二基咪唑 98%四 for HPLC, ≥99.9%

孕酮受體檢測試劑盒咪唑 99.5%，用于緩沖溶液甲苯 for HPLC, 99.9%（劇品）

載脂蛋白A1檢測試劑盒咪唑 99.5%，用于熒光分析L-a-氨基己二酸 98%

載脂蛋白A2檢測試劑盒咪唑 99.5%，分子生物學級聚氯乙烯 K-value 72-71

載脂蛋白A4檢測試劑盒咪唑 99%聚氯乙烯 K-value 68-65

實驗要點及說明：

1．本方法適用于貼壁細胞培養，而不適用于懸浮細胞培養，懸浮細胞可使用滴片法； 

2．所使用的蓋玻片應該為玻璃**，并經過鉻酸洗液處理； 

3．蓋玻片非常薄，易碎，取放蓋玻片時動作要輕； 

4．如果需要更多生長狀態一致的細胞，可以使用較大的培養皿，但不宜過大，以避免培養液的浪費和增加污染機率； 

5．如果細胞貼壁生長能力較差，可將蓋玻片在0.5%多聚賴氨酸溶液中浸泡5-10分鐘并自然晾干。