G-Olig2細胞

ATCC Number： SCRC-1037?

生長狀態： 貼壁生長

細胞形態： 球形

年限： embryo, blastocyst

細胞類型： 胚胎干細胞

數量： 大量

是否是腫瘤細胞： 0

物種來源： 小鼠

運輸方式： 凍存運輸

品系： 129X1/SvJ

組織來源： inner cell mass

器官來源： 胚胎

Designations: G-Olig2

Depositors: DI Gottlieb

G-Olig2細胞Biosafety Level: 1

Shipped: frozen

Medium & Serum: See Propagation

Growth Properties: adherent

Organism: Mus musculus

Morphology: spherical colony

Source: Organ: embryo

Strain: 129X1/SvJ

Tissue: inner cell mass

Cell Type: embryonic stem cell;

Permits/Forms: In addition to the MTA mentioned above, other ATCC and/or regulatory permits may be required for the transfer of this ATCC material. Anyone purchasing ATCC material is ultimately responsible for obtaining the permits. Please click here for information regarding the specific requirements for shipment to your location.

Restrictions: Prior to purchase, for-profit commercial institutions must obtain a license agreement. For instructions on how to proceed, please contact ATCC 's Office of Licensing and Business Development at licensing@ATCC .org or 703 365 2773.

Isolation: Isolation date: August, 2001

Applications: G-Olig2細胞This insertion permits visualization and physical separation of a subset of living ES-cell-derived neural cells.

G-Olig2 cells were designed by the insertion of green fluorescent protein (GFP) into the gene for Olig2, a lineage-specific transcription factor.

Age: embryo, blastocyst

Comments: G-Olig2 cells were designed by the insertion of green fluorescent protein (GFP) into the gene for Olig2, a lineage-specific transcription factor. This insertion permits visualization and physical separation of a subset of living ES-cell-derived neural cells. [PubMed: 12529550] SCRC-1037 is a subclone of deposited cell line.

Propagation: ATCC complete growth medium: ES-DMEM (ATCC SCRR-2010) supplemented with 2.0 mM L-Alanyl-L-Glutamine (ATCC 30-2115), 0.1 mM non-essential Amino Acids (ATCC 30-2116), 0.1 mM 2-mercaptoethanol (Invitrogen Life Technologies No. 21985), 1000 U/ml mouse leukemia inhibitory factor (LIF) (Chemicon No. ESG1107) and 15% fetal bovine serum (ATCC SCRR-30-2020).

Atmosphere: air, 95%; carbon dioxide (CO2), 5%

Temperature: 37.0°C

Subculturing: Protocol: Establishing and maintaining your culture:

To insure the highest level of viability, be sure to warm media to 37?C before using it on the cells.

Plate mitotically arrested MEF (CF-1) (ATCC SCRC-1040)as a feeder layer at approximately 1.5 to 2.0 X 10(6) cells/T25 at least one day before plating the cells (see product sheet for mitotically arrested MEF for protocol). One hour before thawing the vial of cells, perform a 100% medium change using 4 ml of complete ES-DMEM (see ATCC complete growth medium for recipe).

Thaw the vial by gentle agitation in a 37?C water bath. To reduce the possibility of contamination, keep the O-ring and cap out of the water. Thawing should be rapid G-Olig2細胞(approximately 90 seconds).

Remove the vial from the water bath as soon as the contents are thawed, and decontaminate by dipping in or spraying with 70% ethanol. All of the operations from this point on should be carried out under strict aseptic conditions.

Transfer the vial?s contents plus 5 ml of complete ES-DMEM to a 15 ml centrifuge tube. Use an additional 1 ml of media to rinse the vial and transfer the liquid to the 15 ml tube. Add 4 ml of complete ES-DMEM to bring the total volume to 10 ml.

Spin the cells at 270 xg for 5 min. Aspirate the supernatant and resuspend the pellet in 5 ml of complete ES-DMEM.

Add the 5 ml of cell suspension to the T75 flask containing feeder cells and 10 ml complete ES-DMEM.

Incubate the culture at 37?C in a humidified 5% CO2/95% air incubator. Perform a 100% medium change every day, passage cells every 1 to 2 days.

Subculturing Procedure:

To insure the highest level of viability, be sure to warm media and Trypsin/EDTA to 37?C before using it on the cells. Volumes used in this protocol are for T75 flasks. Proportionally adjust the volumes for culture vessels of other sizes. A split ratio of 1:4 to 1:7 every 1 to 2 days is recommended. Plating densities should range from 3 to 4 X 10(6) cells/T75. Note: If the colonies are close to or touching each other the culture is overgrown . Overgrowth will result in differentiation.

Prepare enough flasks with MEFs as stated above in step #1.

Aspirate the medium from the flask(s) with the cells.

Wash with PBS (Ca+2/Mg+2-free, ATCC cat# SCRR-2201).

Add 3.0 ml of 0.25% (w/v) Trypsin/0.53 mM EDTA solution (ATCC cat # 30-2101) and place in incubator. After about one minute the ES colonies will dissociate and all cells will detach from the flask.

Dislodge the cells by gently tapping the side of the flask then wash the cells off with 7-10 ml of fresh culture medium. Triturate cells several times with a 10 ml pipette in order to dissociate the cells into a single-cell suspension.

Spin the cells at 270 xg for 5 min. Aspirate the supernatant.

Resuspend in 30 to 50 ml of fresh culture medium, depending on the split ratio.

Aspirate the medium from 4 to 7 feeder layer flasks and replace it with 15 ml/flask of the cell suspension.

Incubate the culture at 37?C in a humidified 5% CO2/95% air incubator. Perform a 100% medium change every day, passage cells every 1 to 2 days.

Interval: Every one to two days

Subcultivation Ratio: G-Olig2細胞A subcutivation ratio of 1:4 to 1:7 is recommended.

Medium Renewal: Every day

Preservation: Freeze medium: Complete growth medium supplemented with an additional 10% FBS and 10% DMSO.

Storage temperature: liquid nitrogen vapor phase

References: 57459: Matise M, et alProduction of targeted embryonic stem cell clonesIn: Matise M, et alGene Targeting: A Practical ApproachOxfordOxford University Press101-132, 1999

89294: Xian HQ, et al. A subset of ES-cell-derived neural cells marked by gene targeting. Stem Cells 21: 41-49, 2003. PubMed: 12529550