|
Standard Outfit:
|
|
|
|
1
|
barrel, consisting of a bearing-mounted middle segment, 2 intermediate segments of 250 mm height, and 2 bottom segments, internal length of the chute 275 mm, internal width of the chute 275 mm, bottoms made of 19 mm thick wood, with removable steel sheets of 3 mm thickness, including a charging door, internal height 1 175 mm, height of fall 1 000 mm, by removing the intermediate segments convertible to internal height 675 mm and height of fall 500 mm,
|
|
|
|
1
|
frame with barrel support,
|
|
|
1
|
drive unit with AC geared motor, to drive the barrel at 5 rpm, with slip friction clutch as protection in case of accidental contact,
|
|
|
1
|
switching and monitoring unit with fuses, protecting switch for the motor, preset able counter to indicate the number of falls and to switch off the unit.
|
|
|
Design:
|
|
|
steel construction, varnished papyrus-white structured, barrel corpus of stainless steel sheet, varnished stone-grey structured, some steel parts black-oxide-finished, for connection to 230 V AC, 50 Hz,
|
|
|
Tumbling Barrel Test Machine 50
|
Article No.:
|
F 06.50
|
|
|
|
|
Alternatively:
|
|
|
F 06.15, similar to F 06.50 however with one segment barrel of internal height 675 mm and height of fall 500 mm,
|
|
|
Tumbling Barrel Test Machine 15
|
Article No.:
|
F 06.15
|
|
|
|
|
Special model:
|
|
|
F 06.30, to determine the mechanical strength of accessories for vacuum cleaners, according to IEC 60312, similar to F 06.15 however of larger dimensions, total height of the barrel approx. 1 070 mm, height of fall 800 mm,
|
|
|
Tumbling Barrel Test Machine 30
|
|