PTL試驗指/針/銷/棒Ｐ10.14

點擊查看大圖

產品價格： < 面議

產品型號：Ｐ10.14

品牌：德國PTL

公司名稱：深圳市智檢系統有限公司

所在地：廣東深圳

瀏覽次數：5835 次

立即詢價 在線咨詢

騰訊QQ
MSN

產品簡介

PTL試驗指/針/銷/棒

試驗指、針、銷用于檢查電器及電器附件的防觸電性能。
試驗指、針、銷用于檢查電器及電器附件的防觸電性能。
PTL試驗指/針/銷試驗指、針、銷用于檢查電器及電器附件的防觸電性能。

產品詳細信息

PTL試驗指/針/銷

詳細說明:

試驗指、針、銷

用于檢查電器及電器附件的防觸電性能。


	Used to test accessibility through enclosure openingsper IEC, EN, UL and CSA Standards. Body is Delrin, tip is stainlesssteel. NOTE: Don't ever purchase an all plastic version - the tip is too narrow to maintain tip rigidity!


	This pin is used on appliances for verifying that thereis no access to hazardous live parts of heating elements whichcould be touched accidentally by a tool (i.e. screwdriver). MeetsIEC & EN requirements. Body is Delrin, tip is stainlesssteel.


	A“rigid” version of the International Test Finger, Used for forceapplications on openings (i.e. vents) as required by IEC, EN, ULand CSA Standards. Handle made of Delrin, rigid finger made ofchrome plated steel.


	Used to verify protection of persons against accesswith a wire. Meets IEC and EN Standards including IEC 529 for IP4and suffix D codes. The handle and stop face are made of Delrin.The wire is made of stainless steel.


	Used to verify the protection of persons against accessto hazardous parts. Also used to verify the protection againstaccess with a tool. Meets IEC and EN Standards including IEC 529for IP3 and suffix C codes. The handle and stop face are made ofDelrin. The rod is made of stainless steel.


	Used to verify protection against access to hazardousparts by use of a tool through holes which give access to pre-setcontrols. Meets IEC, EN, UL and CSA Standards including IEC 1010,EN 61010-1, U- 3101-1, UL 3111-1 and CSA 1010-1. The handle andstop face are made of Delrin. The rod is stainlesssteel.


	Used to verify protection against access to hazardousparts through top openings. Meets IEC, EN, UL and CSA Standardsincluding IEC 1010, EN61010-1, UL3101-1, and CSA 1010-1. The handleand stop face are made of Delrin. The rod is made of stainlesssteel.


	This is the “International” test finger required bymost IEC, EN and CSA Standards, in addition to many UL Standards.Built in strict accordance to the newest requirements - withintegral palm simulator. This is the ONLY Finger Probe availablewith a integral jack in the handle for continuity testing - asmandated by the IEC CB Scheme. Finger made of chrome plated steel.All parts precision machined.


	This is the “UL” test finger, researched and designedby UL and required by most UL Standards. Palm simulator andrestricted joint movement simulates human finger movement. Made ofall nylon. Bell-Core accessory available.


	Probe is required by GR-1089-CORE. Probe isplastic with 2 precision Delrin? disks. The disks are positioned at35 mm. and 9 mm. from the top of probe. It is used to verifyprotection from hazardous parts.


	Fortesting accessibility in appliances with visibly glowing heatingelements. Also for testing parts supporting such elements. Complieswith IEC, EN, UL & CSA requirements. Made entirely of stainlesssteel.


	This probe is intended to verify protection of personsagainst access to hazardous parts for an IP1 Code. Also used toverify protection from access with the back of the hand for an IPsuffix A code.


	This sphere is intended to verify the degree ofprotection of enclosures for an IP2 Code per IEC 529. Sphere ishardened steel with chrome finish.


	Fortesting enclosure rigidity in accordance with clause 8.1 of IEC1010 and the EN, UL and CSA versions of this Standard. Handle isDelrin, tip is stainless steel.
PTL試驗指/針/銷

	Fortesting accessibility in accordance with many UL Standards. Thehandle is Delrin and the tip is stainless steel.


	Fortesting accessibility in accordance with many UL Standards. In manyStandards, this probe is used for access to enamel coated wire(i.e. transformers and inductors). The handle is Delrin and the tipis stainless steel.


	Fortesting accessibility to hazardous moving parts such as access tofan blades through a fan finger guard. Complies with UL Standards.Made entirely of stainless steel, weighs 1 lb.


	Four probes in one! Used to determine accessibility toshock hazards in many household and audio/video products, includingStandards UL 1410 and UL 6500. Made entirely of nickel-platedsteel.


	Used on enclosures prior to accessibility testing. Thetest hook is “hooked” into vents and seams in the enclosure &then pulled with a force (usually 20N). The hook has a hole at itslong end, for use in conjunction with a PFI series Force Gauge.Made entirely of stainless steel.
PTL試驗指/針/銷

	Fortesting the requirement of snap-in devices and snap togetherenclosures that protect the user from accessibility to hazardousparts. Complies with most Standards including IEC 335 basedStandards and UL 1025.