TCP0150電流探頭：廣州市創(chuàng)賽博電子有限公司代理經(jīng)銷美國泰克Tektronix電流探頭TCP0150。

TCP0150電流探頭：
容易進行高精度AC/DC電流測量，操作簡便，直流電流精度典型值≤1%；
帶寬DC～20MHz，電流從±5mA到150A有效值，可滿足大電流和小電流測試需要；
具有自動匹配刻度單元，并在示波器顯示屏上讀出；
在ATE設(shè)備通過GPIB接口可進行遠程編程；
容易退磁和自動歸零。
適用示波器型號：DPO4032、DPO4034、DPO4054、DPO4104
MSO4032、MSO4034、MSO4054、MSO4104
部分DPO7000系列示波器。
Features & Benefits
Easy-to-Use and Accurate AC/DC Current Measurements
Connects Directly to DPO4000, MSO4000, and DPO7000 Series Oscilloscopes Using the TekVPI Probe Interface
DC to 20 MHz Bandwidth
150 ARMS Maximum Current Capability
500 A Peak Pulse Current Capability
High Accuracy with Typically Less Than 1% DC Gain Error
Accurately Measures Current levels as Low as 5 mA
Low Noise and DC Drift
Provides Automatic Units Scaling and Readout on the Oscilloscope's Display
Remote Programmable GPIB Control for ATE systems
Split-core Probe Head Construction Allows Easy Connection to Conductors
Easy to Degauss and Autozero
Setup Controls and Probe Status and Diagnostic Indicators are Provided on Both the Probe Hardware and through an Easy-to-Access Scope UI Display Menu
Applications
Power Supplies
Semiconductor Devices
Power Inverters/Converters
Electronic Ballasts
Industrial/Consumer Electronics
Motor Drives
Transportation Systems
Note: Requires DPO7000 Series Firmware Version 3.0.2 or greater. Requires MSO/DPO4000 Firmware Version 2.06 or greater.
TCP0150 is a high performance and easy-to-use 150 A AC/DC current probe designed for use and direct connection (without the need of an additional power supply) to the TekVPI? probe interface used on Tektronix DPO4000, MSO4000, and DPO7000 Series oscilloscopes. This AC/DC current measurement probe provides 20 MHz of frequency bandwidth with selectable range control for 25 A and 150 A measurement ranges. It also provides low-current measurement capability and accuracy to current levels as low as 5 mA per division – important for achieving broad dynamic current range of high-level and low-level measurement signals.